Loading... Please wait...

Our Newsletter

SCHURTER Power Entry Modules with fuse holder - Type GFS2

  • Image 1
Calculated at checkout

Product Description




- Panel Mount: Snap-in version from front side
- 2 Functions: Appliance Inlet protection class I or II, Fuseholder for fuse-links 5 x 20 mm on the rear-side 1  or 2 pole


- VDE Certificate Number:40024857
- UL File Number:E93617, E96454
- CSA File Number:38456
- CCC File Number:2006010204183182


- Two “locking” snappers reinforce connector against repeated or excessive pull out force during plug removal
- All single elements are already wired
- Fuseholder on the inside of the equipment prevents accidental use of incorrect fuse-links by the user
- Suitable for use in equipment according to IEC/UL 60950


Technical Data

Ratings IEC 10 A / 250 VAC; 50 Hz
Ratings UL/CSA 10 A / 125 VAC; 60 Hz
Dielectric Strength > 2.2 kVAC between L-N
> 3 kVAC between L/N-PE
(1 min/50 Hz)
Allowable Operation Temp. -25 °C to 70 °C
Degree of Protection from front side IP 40 acc. to IEC 60529
Protection Class Suitable for appliances with protection class I or II acc. to IEC 61140
Terminal Quick connect terminals 4.8 x 0.8 mm , Ground terminal: Solder terminals or quick connect terminals tin-plated
Solder terminal on request
Panel Thickness s Snap-in: 1/1.2/1.5/2/2.5/3 mm
(other on request) (all steps with one variant)
Material: Housing Thermoplastic, black, UL 94V-0
Appliance Inlet C14 / C18 acc. to IEC 60320,
UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II
Fuseholder 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6,
for fuse-links 5 x 20 mm
Rated Power Acceptance @ Ta 23 °C 5 x 20: 3.15 W (1 pole)/ 2.5 W (2-pole) per pole
Power Acceptance @ Ta > 23°C Admissible power acceptance at higher ambient temperature see derating curves



punched / drilled
Line and neutral: Quick-connect 
Quick connect terminal 4.8 x 0.8 mm
GSF2_Massbild_Anschlussbild_Löt-/Steckanschluss 4.8x0.8mm
Ground terminal: Quick connect 
Quick connect terminal 4.8 x 0.8 mm
GSF2_Massbild_Anschlussbild_Schutzleiter Löt-/Steckanschluss 4.8x0.8mm
Ground terminal: Quick-connect 
Quick connect terminal 6.3 x 0.8 mm
GSF2_Massbild_Anschlussbild_Schutzleiter Löt-/Steckanschluss 6.3x0.8mm

Assembly Instructions

1) Main snappers for snap-in mounting
2) Additional safety snappers not in use
3) Additional safety snappers in use
against excessive pull out force

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the SCHURTER Power Entry Modules with fuse holder - Type GFS2 to your wish list.

You Recently Viewed...